HomeStructured CablingVoIP Telephony Cabling

VoIP & Telephony Cabling in the UAE

VoIP & telephony cabling in the UAE: structured voice points, PoE for IP phones, PBX & gateway connectivity for offices and call centers.

Cat6/6A/7Copper categories
OS2 / OM4Fiber options
TIA-568 / ISOStandards
Fluke-testedCertified links
Overview

VoIP & Telephony Cabling

Crystal-clear calls start with the cabling. AlphaStone installs VoIP and telephony cabling across the UAE — structured voice points, PoE runs for IP phones, and PBX/gateway connectivity — for offices, call centers and hospitality, certified and ready for any IP phone system.

  • structured voice points
  • PoE for IP phones
  • PBX/gateway connectivity
  • call-center density
Get a Free Quote
VoIP and Telephony Cabling
Types & options

Options we design & install

Cat6

1G, 250MHz — most offices

Cat6A

10G to 100m, 500MHz

Cat7 / 7A

Shielded, 600MHz+

Fiber (OS2/OM4)

Backbones & data centers

What’s included

What the service covers

  • Site survey & design
  • Containment & pathways
  • Cable pulling & dressing
  • Termination & patching
  • Fluke DSX certification
  • TIA-606 labeling
  • As-built documentation
  • Warranty registration
Comparison

PoE classes for voice & devices

We size PoE to the devices on the network.

PoE typeStandardPowerPowers
PoE802.3af15.4 WIP phones
PoE+802.3at30 WPTZ & APs
PoE++802.3bt60–100 WHeavy devices
Why it matters

Key benefits

structured voice points

PoE for IP phones

PBX/gateway connectivity

call-center density

certified & labeled.

Ready to start your project?

Free site survey and a fixed quote anywhere in the UAE.

How we work

Our delivery process

1

Free Site Survey

We assess your site, requirements and compliance needs.

2

Design & Fixed Quote

Clear scope, standards and transparent pricing.

3

Install & Test

Certified installation, tested and labeled, minimal downtime.

4

Handover & AMC

Documentation plus optional maintenance contracts.

Standards & compliance

BICSI / TIA-568 / ISO 11801

  • 90m permanent link + 10m patch cords
  • TIA-606 labeling & administration
  • Fluke DSX channel certification
  • Up to 25-year manufacturer warranty
Get a Compliant Quote
VoIP and Telephony Cabling - standards
Where it applies

Industries & properties we serve

Offices
Data Centers
Warehouses
Retail
Hotels
Healthcare
Education
Villas
FAQs

Frequently asked questions

Do IP phones run over the data cabling?

Yes — VoIP and IP phones run over the same structured Cat6/Cat6A cabling with PoE from the switch, so a single outlet can serve both the phone and a daisy-chained PC, keeping the install tidy and cost-effective.

Can you migrate us from analog to VoIP?

Yes. We re-cable or re-purpose existing cabling for an analog-to-IP migration and support the cutover, so the move to VoIP is smooth with minimal downtime.

Do you supply the phone system too?

We focus on the cabling and connectivity and integrate cleanly with your chosen PBX, IP-PBX or hosted provider — coordinating with your telephony vendor so handsets work on day one.

Which cable category do I need?

Cat6 suits most offices; Cat6A supports 10G to 100m; Cat7 adds shielding; fiber is used for backbones. We advise per use.

Do you certify the cabling?

Yes. Every link is certified with a Fluke DSX analyser (channel and permanent-link testing) and handed over with full pass/fail test reports, a labelled outlet schedule and as-built drawings — documenting performance to the relevant TIA/ISO standard and supporting the warranty.

Is it BICSI and TIA compliant?

Yes — designed and installed to BICSI, TIA-568 and ISO 11801, with TIA-606 labeling.

Where we work

Serving all seven emirates

Get a free quote

Start your project with AlphaStone

Free site survey and a no-obligation, fixed quote. Prefer to talk? Call or WhatsApp +971 55 505 9256.

  • Free site survey & honest advice
  • Transparent, fixed pricing
  • Compliant (SIRA / ADMCC / BICSI) design
  • One contractor for cabling, network & security

Request your quote

We reply within one business day.