Explosion-Proof CCTV Camera Installation in the UAE
Explosion-proof (ATEX/IECEx) CCTV installation across the UAE for oil & gas, petrochemical & industrial hazardous areas. ATEX/IECEx-rated equipment, designed to SIRA/ADMCC requirements: stainless housings, HD/4K, with AMC.
Explosion-Proof CCTV Installation
In oil & gas, petrochemical and industrial hazardous areas, cameras must not ignite flammable gas or dust. AlphaStone installs explosion-proof CCTV across the UAE using ATEX/IECEx-certified stainless-steel housings rated for hazardous zones, with HD/4K and optional thermal imaging – for refineries, tank farms, offshore, chemical plants and heavy industry, engineered for safety, heat and corrosion.
- ATEX/IECEx-certified housings
- Rated for hazardous zones
- Stainless-steel & corrosion-proof
- HD/4K & thermal options

Options we design & install
Ex-Proof Fixed
Certified fixed camera
Ex-Proof PTZ
Certified pan-tilt-zoom
Ex-Proof Thermal
Heat detection in Ex areas
Marine-Grade
316L stainless for offshore
What the service covers
- Free site survey & camera plan
- HD/4K cameras supplied & fitted
- NVR/DVR & secure storage
- PoE cabling & containment
- Mobile & remote-view setup
- SIRA-compliant configuration
- Testing, labeling & handover
- Optional AMC & support
Explosion-proof camera selection
An explosion-proof camera is only suitable if its certificate matches the hazardous-area classification of the exact location where it will be mounted. We check four things before specifying anything.
1. Zone
Gas and vapour areas are classified as Zone 0 (present continuously or for long periods), Zone 1 (likely in normal operation) or Zone 2 (not likely, and only for short periods). Dust areas use Zone 20, 21 and 22 on the same basis. CCTV is normally installed in Zone 1, Zone 2, Zone 21 or Zone 22; cameras are rarely placed inside Zone 0 or Zone 20.
2. Gas or dust group
Gases are grouped by how easily they ignite: IIA (for example propane), IIB (for example ethylene) and IIC (hydrogen and acetylene). IIC-rated equipment also covers IIB and IIA. Dusts are grouped IIIA (combustible flyings), IIIB (non-conductive dust) and IIIC (conductive dust).
3. Temperature class
The camera’s maximum surface temperature must stay below the ignition temperature of the gas present. Classes run from T1 (450 °C) to T6 (85 °C); The required class is set by the site’s hazardous-area classification drawings. The certified ambient range also has to cover UAE summer conditions, often with a sunshield.
4. Protection method & housing
Cameras usually sit in flameproof (Ex d) enclosures, with Ex e terminal boxes and Ex-certified cable glands or barrier glands at every entry. Housings are 316L stainless steel for coastal, offshore and chemical sites, or 304 stainless or copper-free aluminium for drier onshore areas, typically rated IP66/IP68.
| Area / need | Recommended |
|---|---|
| Gas hazardous zone (1/2) | ATEX/IECEx Ex-d housing, correct gas group & T-class |
| Hydrogen or acetylene present | IIC-certified camera and glands |
| Combustible dust (Zone 21/22) | Dust-certified (Ex t) housing, IP6X |
| Corrosive / offshore | 316L stainless steel |
| Long-range detection | Ex-proof PTZ or thermal |
| High temperature | High-temp rated housing, sunshield |
| Camera type | Best for | Things to consider |
|---|---|---|
| Ex fixed (bullet/box) | Process skids, pumps, gates, loading bays and dispensers | Fixed field of view; simplest to certify, mount and maintain |
| Ex PTZ | Tank farms, jetties and large open plant areas | Covers wide areas from one point; operator-driven, heavier, with moving parts to maintain |
| Ex thermal | Perimeters, darkness, smoke or haze, and hot-spot monitoring | Detects people and heat, not faces or plates; often paired with a visible-light camera |
Key benefits
Safe in flammable areas
Rated equipment, SIRA-compliant design
Withstands heat & corrosion
HD/4K plus thermal
Built for heavy industry
Ready to start your project?
Free site survey and a fixed quote anywhere in the UAE.
Our delivery process
Free Site Survey
We assess your site, requirements and compliance needs.
Design & Fixed Quote
Clear scope, standards and transparent pricing.
Install & Test
Installation to ATEX/IECEx requirements, tested and labeled, minimal downtime.
Handover & AMC
Documentation plus optional maintenance contracts.
SIRA (Dubai) & ADMCC (Abu Dhabi)
ATEX/IECEx and SIRA/ADMCC are separate requirements, and a hazardous-area CCTV system usually has to meet both. ATEX and IECEx certify the equipment itself as safe to use in a classified zone. SIRA in Dubai and ADMCC in Abu Dhabi govern how CCTV systems are designed, recorded, retained and handed over. An Ex certificate does not make a system SIRA-compliant, and SIRA or ADMCC approval does not make a camera safe for a hazardous area. We design to both, delivering SIRA-compliant systems with our SIRA-approved partner.
- ATEX/IECEx certificates and Ex marking checked per camera location
- Minimum 2MP–4K camera resolution to spec
- 31-day minimum footage retention
- Compliant storage & restricted access
- Correct signage & privacy placement

Industries & properties we serve
Explosion-proof CCTV is specified wherever flammable gas, vapour or combustible dust can be present, and the area has been classified into zones by the site owner.
Typical locations include process areas and wellhead or manifold skids, loading and unloading bays, fuel dispensers and forecourts, tank farm bunds, jetties and marine loading arms, chemical and paint stores, and dust-handling areas such as silos. For general plant, yard and warehouse coverage outside classified zones, see our industrial CCTV systems page.
Frequently asked questions
What is an explosion-proof camera?
It is a camera in a certified housing designed to contain any internal spark or heat so it cannot ignite the flammable gas or dust in the surrounding area.
What certifications matter (ATEX / IECEx)?
ATEX and IECEx certify equipment for use in hazardous zones. We supply cameras certified for the correct zone and gas group for your site.
Where are explosion-proof cameras needed in the UAE?
Oil & gas, refineries, tank farms, petrochemical plants, offshore platforms and some industrial and chemical sites.
Are the housings corrosion-resistant?
Yes. For offshore and corrosive environments we typically use 316L stainless-steel housings.
Can explosion-proof cameras be thermal or PTZ?
Yes. PTZ and thermal versions are available inside certified explosion-proof housings.
Is ATEX/IECEx certification the same as SIRA or ADMCC approval?
No. ATEX/IECEx covers whether the camera and its housing are safe in a classified hazardous zone. SIRA (Dubai) and ADMCC (Abu Dhabi) cover how the CCTV system is designed, recorded and handed over. Hazardous-area sites usually need both.
Are they SIRA compliant?
We design to SIRA (Dubai) and ADMCC (Abu Dhabi) standards in addition to the hazardous-area certification the site requires.
Related services
Serving all seven emirates
Start your project with AlphaStone
Free site survey and a no-obligation, fixed quote. Prefer to talk? Call or WhatsApp +971 55 505 9256.
- Free site survey & honest advice
- Transparent, fixed pricing
- Compliant (SIRA / ADMCC / BICSI) design
- One contractor for cabling, network & security
Request your quote
We reply within one business day.
